Riso RZ 970 Series User Manual - Adjusting The Print Position
Functions for Printing
Adjusting the Print Position [Print Position Adjustment]
94
Adjusting the Print Position
[Print Position Adjustment]
The print position on the paper can be adjusted.
Adjustment range Vertical direction (bottom
←→top): ±15 mm Horizontal direction (left←→right): ±10 mm
The positioning may be adjusted while Printing is in progress.
Note:
• After adjusting the print position, print a proof copy to check the result.
• The numerical value formed by “Print Position Adjustment” is the target. Set the actual position by verifying and
adjusting the printed material.
Press
the , ,
or
key
to
move up or down.
1)
Key
Each press shifts the print position downward in steps of
about 0.5 mm.
2)
Key
Press the key to move the print image about 0.5 mm to
the left on the paper.
3)
Key
Each press shifts the print position upward in steps of
about 0.5 mm.
4)
Key/Original Position Indicator
Press to return to original position.
To restore the original Print Position during printing, hold
the button down for more than 1 second.
When the original Print Position is restored the indicator
will light up.
5)
Key
Press the key to move the print image about 0.5 mm to
the right on the paper.
Bottom
Top
Left Side
Right Side
Bottom
Top
Left Side
Right Side