Riso RZ 970 Series User Manual - page 252
Troubleshooting
Troubleshooting
251
Paper goes over the receiving
tray stopper.
---
Follow the steps to level the receiving tray
as follows:
1)
Fold the Receiving Tray Paper
Guides/Stopper.
2)
Lift up the sides of the receiving tray
with both hands, and move the
receiving tray shaft to position B.
Position A is recommended in most
cases.
A: Ordinary position
B: Move to this position when paper
goes over the tray.
Paper is not smoothly fed from
the Standard Feed Tray.
(skipped paper, or multiple-
sheet feeding)
The print paper is inappropriate.
Use paper that falls within the
recommended range.
The position of the Paper Feed
Pressure Adjustment Lever was
inappropriate.
When using thick or slippery paper, set the
Paper Feed Pressure Adjustment Lever to
“Thick Paper”.
Problem
Possible Cause
Action
A
B