Riso RZ 970 Series User Manual - page 242
Troubleshooting
When a Message Displays
241
Consumable Information Screen
In order to assure optimum printing, the machine acquires information from the consumables.
If acquired matching information is not proper, the Consumable Information screen is shown.
Enter appropriate values.
The
icon on the Info Button will be greyed out when this occurs.
Note:
• Entering an inappropriate value does not affect usual operations but may result in bad print quality.
• When you perform the following operations, the values set on the “Consumables Information Input Wizard” screen
disappears and thus you need to enter the values again.
– After the power switch is set to
(OFF), the switch is set to
(ON) again
– After the machine is placed into the Sleep status, the
key is pressed
• If you are not sure the best setting for the consumables used in the machine, we may suggest that you use “1”
(default setting) except for “H1” setting and adjust from there if necessary based on the result of the printed copies.
Riso takes no responsibility, and cannot advise as to the best setting, for particular consumables not manufactured
and sold by Riso.
Ink Information Input Screen
This screen pops up when data could not be obtained from the Ink Cartridge.
Touch [OK] and enter values as shown below.
Screen Display
Description
Values
[H1] Ink Colour Setting
Select the same colour as the Print Drum
currently in use.
1: Black 2: Colour
Ready to Make Master
Page (A4)
Feed Tray
Info
Basic
Admin.
READY
Line
Black
Idle
Cannot Get Consumables Info
Input Values Required
Ink
OK