Riso RZ 970 Series User Manual - page 37
Basic Operations
Preparing to Print
36
Adding or Replacing Paper
When you add paper or replace with paper of a different size at the time of printing, press the Feed Tray Ascent/
Descent Button to lower the Standard Feed Tray.
• Press the Feed Tray Ascent/Descent Button to lower the Standard Feed Tray.
• If you press and hold the button, the Standard Feed Tray will be lowered until
you depress the button.
• When the tray runs out of paper or you remove all paper, the tray is automati-
cally lowered to the bottom.
Important!:
• When changing to a different paper size, remember to readjust the Receiving Tray Paper Guides and Paper Stop-
per.
• When changing to a different quality paper, remember to adjust the Paper Feed Pressure Adjustment Lever.
Closing the Standard Feed Tray
Before closing the Standard Feed Tray, remove the paper and widen the Feed Tray Paper Guides to the limits. Then
close the Standard Feed Tray.
Feed Tray Ascent/Descent
Button