Riso RZ 970 Series User Manual - (For Rz977 Only)
Functions for Master-Making
Manually Selecting the Feed Tray (for RZ977 only) [Feed Tray]
59
Manually Selecting the Feed Tray
(for RZ977 only)
[Feed Tray]
Loading different sizes of paper in Standard Feed Tray (Standard-T), Feed Tray1, and Feed Tray2 will enable quick
choices for paper size at printing.
Available options are “Auto” and “Feed Trays” (Standard Feed Tray (Standard-T), Feed Tray1, Feed Tray2).
Auto
Automatically detects and selects the Feed Tray in which paper of right size is loaded.
At the Master-making mode, selects the Feed Tray in which paper of the size suitable for the original and repro-
duction size is loaded.
At the printing mode, selects the Feed Tray for paper in the same size as that of the master set on the drum.
Important!:
• When “Auto” is selected, “Multi-Up Print” and “Auto Reproduction” functions are not available.
Note:
• If “Triple-Tray Source” is set OFF on the Admin. screen, Auto mode is not be available for the Standard Feed
Tray.
• Auto mode is not available for the Feed Tray in which custom-sized paper is loaded.
• If paper in the same size is set in two or more Feed Trays in the same direction, feeding is done in the manner
shown below.
Standard Feed Tray (Standard-T)
→Feed Tray1→Feed Tray2
• If “Auto 90°Rotation” is set to ON on the Admin. screen, the Feed Tray in which paper of right size is loaded in
different direction, if any, is selected, and the scanned image is printed 90-degree rotated. (For RZ977 only)
1
Touch [Feed Tray] on the Master-
Making Basic Screen.
2
Touch [Standard-T], [Feed Tray1], or
[Feed Tray2].
Note:
• Immediately after start-up or after pressing the
button, “Auto” mode is selected automati-
cally.
READY
A4
Line
Black
Page (A4)
Basic
Selections
Functions
Admin.
Contrast
Auto
Auto
Size
Feed Tray
Idle
Multi-Up
D-Feed
Check
Info
Ready to Make Master
A4
B4
A3
Auto
Feed Tray
Paper Size
Paper Size
Paper Size
Feed Tray2
Feed Tray1
Feed Tray2
Feed Tray1
Standard-T
Standard-T
OK
Cancel