Riso RZ 970 Series User Manual - Printing Area
Advanced Features
Making a Master that Utilizes the Maximum Printing Area [Max. Scan]
139
Making a Master that Utilizes the Maximum
Printing Area
[Max. Scan]
When a master is made, automatic paper size detection and image size adjustment applies to allow appropriate print
margins. This is to prevent paper jams, and to keep internal roller free of ink stains.
By selecting “Max. Scan”, maximum printing area will apply to the scanned image, regardless of the print paper size
or original document size.
Be sure to check the sizes of the original document and the printing paper first.
Maximum printing area: 291 mm
× 413 mm
Important!:
• The 5 mm margin on the top cannot be scanned even in the “Max. Scan” setting.
• Do not use print paper smaller than the area of the image made on the master.
• The entire surface of the Platen Glass must be clean.
By scanning the maximum size, dirt found outside the original document area will also be included in the master.
This may cause the internal roller to be stained with ink.
1
Touch [Functions] on the Master
Making Basic Screen.
2
Touch [Max. Scan].
“Max. Scan” is selected.
READY
A4
Line
Black
Page (A4)
Basic
Selections
Functions
Admin.
Contrast
Auto
Auto
Size
Feed Tray
Idle
Multi-Up
D-Feed
Check
Info
Ready to Make Master
2/4
P.
Basic
Selections
Functions
Admin.
Select Print Quantity
Reservation
Book Shadow
ADF Semi-Auto
Side Margin
Preview
Max. Scan
Overlay
Top Margin