Riso RZ 970 Series User Manual - Printing
Functions for Master-Making
Cutting the Top Margin of the Original and Printing [Top Margin]
82
Cutting the Top Margin of the Original and
Printing
[Top Margin]
You can cut the top portion of the margin to between 0 to 99 mm and make a master.
This feature enables you to skip the registration marks
*
on the original and print on the finish-sized paper without any
of these marks.
* About the Registration Mark
In the field of commercial printing, it is normal to print on paper that is larger than the finished size and then cut down
to the finished size afterwards. The symbol that indicates the position to cut in this event is known as the registration
mark.
Important!:
• When you are setting the “Size”, magnify/reduce using the area that skips the set value.
• Do not use “Auto Reproduction Size”.
• This function cannot be used with “Multi-Up Print” and “2 Up”.
1
Place an original.
Place the original face down on the Platen Glass.
Align centre on the top edge, and close Platen
Cover.
Important!:
• An ADF unit (option) cannot be used with “Top
Margin”.
2
Select paper size.
(For RZ977 only)
Touch [Feed Tray] to select paper size on the
Feed Tray screen.
When using the Standard Feed Tray, load paper
of the required size on the Standard Feed Tray.
3
Touch [Functions] on the Master
Making Basic Screen.
4
Touch [Top Margin].
READY
A4
Black
Page(A4)
Basic
Selections
Functions
Admin.
Contrast
Size
Feed Tray
Idle
Info
Ready to Make Master
D-Feed
Check
Multi-Up
Line
Auto
Basic
Selections
Functions
Admin.
Ready to Make Master
P.
Reservation
Book Shadow
ADF Semi-Auto
Side Margin
Preview
Max. Scan
Overlay
Top Margin
2/4