Riso RZ 970 Series User Manual - page 241
Troubleshooting
When a Message Displays
240
Starting Up RISORINC-NET
Please Wait a Moment
(Symptom)
RISORINC-NET is starting up.
(Action)
Please wait a moment.
Alternatively, print from the machine.
Touch [Close].
(Alternatively, press the
key or the
key to clear.)
!! The Data Storage Area
has Become Full !!
Clear Old Storage Data
(Symptom)
Insufficient data storage capacity.
(Action)
Check the stored data and delete
unnecessary jobs.
Touch [Cancel].
(Alternatively, press the
key or the
key to clear.)
• For checking the storage memory
Touch [Storage Memory].
!!The Print Drum Type
has been Changed!!
Select the Current
Print Drum Type
(Symptom)
A different type of Print Drum has been
installed.
(Action)
Select the type of Print Drum currently
installed.
Alternatively, change back to the same
type of Print Drum as before.
)
p.213
• When changing a setting;
In the Confirm Drum Type screen,
select the type of Print Drum currently
installed and touch [OK].
• When installing a different Print Drum;
Pull out the Print Drum and replace
with the same one as before.
When the Print Drum is re-installed, the
Warning Message will clear.
!! Unmatched Paper Size !!
Interposal Paper is Smaller
than Printing Paper
Check Interposal Paper Size
(Symptom)
Interposal Papers are smaller than
paper size.
(Action)
Load Interposal Papers of appropriate
Touch [Close].
(Alternatively, press the
key or the
key to clear.)
!! Unmatched Size--
Current Page and
Printing Paper !!
Check Paper Size
(Symptom)
The original data sent from the computer
does not match the print paper size.
(Action)
Check the print paper size and change
paper or size as needed.
• When resuming the print job;
Touch [Continue].
(Alternatively, press the
key to
print.)
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
key or
the
key to clear.)
Message
Symptom/Action
How to Clear a Pop-Up Message