Riso RZ 970 Series User Manual - page 154
Advanced Features
Changing Default Settings [Admin.]
153
[System]
Feed Tray Relay (For RZ977only)
The “Feed Tray Relay” function allows you select
consecutive paper feed from Standard Feed Tray,
Feed Tray1, and Feed Tray2.
If you put paper of the same size, texture and type is
loaded in Feed Trays in the same orientation,
consecutive paper feed is available in the order
Standard Feed Tray (Standard-T)
→Feed
Tray2
→Feed Tray1. )p.204
ON, OFF
Triple-Tray Source (For RZ977 only)
When “Auto” mode is selected for the Feed Tray, set
whether Standard Feed Tray is included or not.
ON, OFF
Paper Interposal (For RZ977 only)
Change the default setting for “Paper Interposal”.
When “Paper Interposal” is ON, specify the tray in
which interposal sheets are loaded.
• Paper Interposal
ON, OFF
• Interposer Tray
Standard-T, Feed Tray1, Feed
Tray2
Stack Guide Ctrl
If the machine is equipped with the Auto-control
Stacking Tray, specify the guides that are moved
outwards when the Receiving Tray Paper Guides’
Opening Button is pressed in order to remove paper
from the Auto-control Stacking Tray.
End, Side, Both
Stock Management
In order to check current stock quantity, insert the
number of consumables purchased.
Note:
• When stock quantity falls below the “Remaining Qty
to be notified”, a message will appear on the display.
• This setting is disabled by factory default.
Consult your dealer (or authorised service
representative) for details.
• Purchase Qty
0-99 Pcs.
• Remaining Qty to be notified
0-99 Pcs.
Beep Sound
Select whether to activate a beep sound when a key/
button is pressed, or when an error occurs.
• ON
Beeps when any key/button is pressed. Beeps when
an event is caused/completed.
• Limited
Does not beep when keys/buttons are pressed.
Does not beep when restarting the machine.
• OFF
Does not beep.
OFF/Limited/ON
Display Access
Button
Functions
Description