Riso RZ 970 Series User Manual - Basic Operations
Preparing to Print
34
Basic Operations
Preparing to Print
First, set up the Standard Feed Tray and Paper Receiving Tray of the machine.
Important!:
• Do not use unsuitable paper, or mix paper of different sizes.
Doing so can cause paper jams and damage the machine.
• When using Feed Trays (for RZ977 only), you do not need to set up the Standard Feed Tray.
See )p.203 for details on how to load the paper in the Feed Trays.
Setting up the Standard Feed Tray and Loading Paper
(when using the Standard Feed Tray)
1
Turn the power ON.
2
Open the Standard Feed Tray.
Pull the Standard Feed Tray to open until it comes
to a rest.
3
Load paper.
1)
Place paper in the printing orientation.
2)
Slide the Feed Tray Paper Guides to fit to the
sides of the paper. Then turn the right and left
Feed Tray Paper Guide Levers to lock the
guides.
: Unlock
: Lock
Important!:
• Make sure that the Feed Tray Paper Guides fit
tight up against the paper.
Failure to do so can produce undesired results.
Note:
• Custom size paper must be registered on the
Admin. screen before use.
Failure to do so may create an incomplete mas-
ter.
ON
OFF