Riso RZ 970 Series User Manual - [Side Margin]
Functions for Master-Making
Adjusting the Side Margins of the Master [Side Margin]
84
Adjusting the Side Margins of the Master
[Side Margin]
If you are using the ADF unit to print multiple originals and need to move the left and right margins to make a master,
use “Side Margin” for one simple operation to offset the margins for all the originals (up to 10 mm left/right).
Important!:
• The “Side Margin” function shifts the location of the original to the right or left. It does not reduce the size of the orig-
inal.
• By using “Side Margin”, the opposite side of the side margin may be pushed out of the print area and not print.
Check the margins of the original prior to setting.
• This function cannot be used with the following functions.
– Multi-Up Print
– 2 Up
Note:
• If “Side Margin” and the print location controls on the control panels are used together, the final print location of the
original can be adjusted up to 20 mm.
• This function can be used to set the side margins even when the original is set on the Platen Glass.
1
Touch [Functions] on the Master
Making Basic Screen.
2
Touch [Side Margin].
3
Touch [Left] or [Right] to adjust.
4
Touch
or
to specify the shift
distance.
You can set from 0 to 10 mm.
READY
A4
Line
Black
Page (A4)
Basic
Selections
Functions
Admin.
Contrast
Auto
Auto
Size
Feed Tray
Idle
Multi-Up
D-Feed
Check
Info
Ready to Make Master
Basic
Selections
Functions
Admin.
Ready to Make Master
P.
Reservation
Book Shadow
ADF Semi-Auto
Side Margin
Preview
Max. Scan
Overlay
Top Margin
2/4
Ready to Make Master
2 / 4
P.
Basic
Selections
Functions
Admin.
Cancel
OK
OFF
L e f t
R i g h t
(Numeric keypad is
available for input)
Side Margin
S h i f t
Ready to Make Master
Basic
Selections
Functions
Admin.
2/4
P.
Cancel
OK
OFF
L e f t
R i g h t
(Numeric keypad is
available for input)
Side Margin
S h i f t
5