Riso RZ 970 Series User Manual - page 42
Basic Operations
Printing from a Paper Document or Book
41
Printing from a Paper Document or Book
The steps for scanning an original for printing is explained below.
Note:
• See “When using a Linked Printer” ()p.43) to print from a Linked Printer (sold separately) with Auto-Link function.
1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the
key are off. Turn the power ON.
• If the
key is lit, the machine is in Energy
Saving mode. Press the
key to cancel
Energy Saving mode.
2
Check the Display.
• If current screen is in Mode Selection, touch
[MasterMake] to switch to the Master Making
Basic Screen.
The following screen appears.
• Make sure either the Master Making Basic
Screen or Print Basic Screen is displayed, and
go to step 3.
Note:
• For RZ977 models, the Feed Tray can be
selected using [Feed Tray].
• When you see [Data-Map] in the Status Area,
the machine is busy receiving electronic data
from the computer. Please wait a moment.
• If you see Link Basic Screen, press the
key to switch to Master Making Basic Screen.
3
Place the original.
Place the original on the Platen Glass or in the
optional ADF (Auto Document Feeder) unit.
When placing on the Platen Glass
Place the original face down on Platen Glass.
Align centre on the top edge, and close Platen
Cover.
Magazines, books, scrap books, etc. should be
placed on Platen Glass.
READY
A4
L i n e
Black
Page (A4)
Basic
Selections
Functions
Admin.
Contrast
Auto
Auto
Size
Feed Tray
I d l e
Multi-Up
Pr int
D-Feed
Check
I n fo
Ready to Mak
Ready to Make Master
e Master
RISO RZ 977
Select an Operation Mode
MasterMake
P r i n t i n g
READY
A4
Line
Black
Page (A4)
Basic
Selections
Functions
Admin.
Contrast
Auto
Auto
Size
Feed Tray
Idle
Multi-Up
D-Feed
Check
Info
Ready to Make Master