Riso RZ 970 Series User Manual - page 77
Functions for Master-Making
Printing Multiple Originals on One Sheet [2 Up] [Multi-Up Print]
76
6
Touch the button of the number of
images to use.
To cancel the “Multi-Up Print” settings, return to
the previous screen and touch [Cancel].
7
Touch [OK].
The following screen appears.
Returns to the Functions screen. “Multi-Up Print”
setting is updated.
Note:
• When using “Multiple-Original” mode, in the
case that the actual number of pages in the
document is less than the number of pages
specified in the mode settings, set an equiva-
lent number of blank pages in the machine to
make up the specified number.
p.70 “Original Orientation and Print Results”
• When using the “Auto Process” setting, printing
will continue automatically when an original is
set on the ADF unit.
• When “Ink Saving” is turned ON, the Image
Processing Mode cannot be changed between
individual originals.
• To cancel a “Multi-Up Print” setting once it has
been confirmed, follow steps 3 and 4, touch
[OFF] and then [ON] on the screen.
8
Make necessary settings.
Make various settings as needed.
9
Press the
key.
Scanning of the original starts.
After scanning has finished, follow the usual steps
to print.
Cancel
OK
Single-Original
Set the original
in direction shown
in the right figure
2UP
4UP
8UP
16UP
Cancel
OK
Single-Original
Set the original
in direction shown
in the right figure
2UP
4UP
8UP
16UP
Basic
Selections
Functions
Admin.
P.
Programme
Digital Copy Count
1/4
Job Memory
Job Memory
Dot Process
Contrast Adj
Tone Curve
Ready to Make Master Multi-Up
Multi-Up Print
2 Up
Cancel
OK
Single-Original
Set the original
in direction shown
in the right figure
2UP
4UP
8UP
16UP
OFF