Riso RZ 970 Series User Manual - Reproducing The Master
Advanced Features
Reproducing the Master [Renew Page][Auto Page Renewal]
136
Reproducing the Master
[Renew Page][Auto Page Renewal]
The data from the last master-making process is temporarily stored on the machine.
Using this data, another master can be reproduced without repeating steps to scan the same original.
You can “Rotate” the original and recreate a master.
“Auto Page Renewal” is a function that automatically recreates a master when a specified number of pages are
printed. If you are printing a large-volume job of thousands or tens of thousands of copies, the master may degrade
before the job is completed.
If you set “Auto Page Renewal” to “ON” prior to starting a large-volume print job, a master will be automatically rec-
reated when the specified number of copies is reached (Auto Renewal Point). This allows you to maintain a consist-
ent print quality from start to finish.
Note:
• “Renew Page” works with data sent from a computer as well. However, if multiple pages exist, only the last page
will be processed with “Renew Page”.
• “Renew Page” function is not available:
– immediately after startup
– after pressing the
key
– after performing “Confidential”
– after performing “Multi-Up Print”
– after performing “Book Shadow”
– when an error has occurred during master-making
– after performing “Link Print”
– after master-making for Data Output Mode (when the optional Key Card Counter is installed.)
• When “Renew Page” or “Auto Page Renewal” is selected, 2 proof copies will be made. When the print position has
been adjusted, the printer will centre the drums to their original position, recreate the master and print a proof copy.
Then, the drums will move to the previously adjusted position and print another proof copy.
• The number of pages in the proof copy when using “Auto Page Renewal” can be adjusted using “Admin.”. )p.152
• Once the print position has been adjusted the new position is saved when master-making is resumed, avoiding the
need for readjustment.
1
Touch [Functions] on the Print Basic
Screen.
2
Touch [Renew Page].
0 . 0mm
0 . 0mm
READY
Black
Basic
Selections
Functions
Admin.
Print Position
Feed Tray
Idle
Info
Select Print Quantity
A4
Auto
D-Feed
Check
Renew Page
Silent
180ppm
Basic
Selections
Functions
Admin.
Select Print Quantity
P.
Renew Page
Special Paper Ctrl
Auto Page Renewal
Scanning Side -ADF
Duplex(Link)
4/4
Job Separation