Riso RZ 970 Series User Manual - page 76
Functions for Master-Making
Printing Multiple Originals on One Sheet [2 Up] [Multi-Up Print]
75
Operation for Multi-Up Printing
1
Place an original.
Note:
• Pay attention to the orientation of the original.
2
Select paper size.
(For RZ977 only)
Touch [Feed Tray] to select [Standard-T], [Feed
Tray1], or [Feed Tray2].
Selecting one of the three trays will automatically
select the reproduction size suitable for the paper
size of the Feed Tray selected.
Important!:
• Make sure to load paper as shown below (Por-
trait direction).
Note:
• Case of RZ970;
If you set the original and print paper prior to
setting “Multi-Up Print”, the printer will automat-
ically set the size ratio.
3
Touch [Functions] on the Master
Making Basic Screen.
4
Touch [Multi-Up Print].
5
Touch [Single] for Single-Original,
touch [Multiple] for Multiple-Origi-
nal.
Except for the original placement method, opera-
tions for “Single-Original” and “Multiple-Original”
are basically the same. This example is for “Sin-
gle-Original”.
Paper output
direction
READY
A4
Black
Page(A4)
Basic
Selections
Functions
Admin.
Contrast
Size
Feed Tray
Idle
Info
Ready to Make Master
D-Feed
Check
Multi-Up
Line
Auto
Basic
Selections
Functions
Admin.
Ready to Make Master
P.
Programme
Digital Copy Count
2 Up
1/4
Job Memory
Dot Process
Multi-Up Print
Contrast Adj
Tone Curve
P.1 / 4
Basic
Selections
Functions
Admin.
Ready to Make Master
Close
Multi-Up Print
Ticket
Multiple
Single