Riso RZ 970 Series User Manual - Paper Recommendations
Before Starting to Use
Paper Recommendations
15
Paper Recommendations
Size and Weight Restrictions
The table shows the specifications of the usable print paper.
*1 RZ977 only
Important!:
• Even when using paper whose sizes and weight are supported by the machine, it may not pass through the
machine depending on such factors as paper finish, ambient conditions, and storage conditions. Keep this in mind
when using the machine. For more information, consult your dealer.
Do not use the following types of paper, as they can cause jams or misfeeds:
• Extremely thin paper
Using the Standard Feed Tray: less than 46 g/m
2
Using Feed Tray 1/2: less than 52 g/m
2
• Extremely thick or heavy paper
Using the Standard Feed Tray: greater than 210 g/m
2
Using Feed Tray 1/2: greater than 105 g/m
2
• Wrinkled, curled, folded, or torn paper
• Chemically treated or coated paper (such as thermal or carbon paper)
• Paper having a sticky section or holes (such as an envelope and label paper)
Note:
• Paper with a horizontal grain direction can cause problems with paper supply. Use paper with a vertical grain direc-
tion.
• Images are not output onto the entire area of usable print paper. The maximum printing areas differ among models.
RISO does not assure that paper outside the above specifications pass through the machine and can be used for
printing.
Paper Source
Usable Printing Paper
Size
Weight
Standard Feed Tray
100 mm
× 148 mm to
320 mm
× 432 mm
46 g/m
2
to 210 g/m
2
182 mm
× 257 mm to
297 mm
× 432 mm
52 g/m
2
to 105 g/m
2