Riso RZ 970 Series User Manual - Enlarging/reducing Originals
Functions for Master-Making
Enlarging/Reducing Originals [Standard Ratio] [Margin+] [Free] [Zoom]
55
Enlarging/Reducing Originals
[Standard Ratio]
[Margin+]
[Free]
[Zoom]
The document can be printed enlarged or reduced. The following methods can be used to enlarge/reduce the origi-
nal.
Standard Ratio
Enlarging or reducing a standard-sized original (A4, B5 etc.) to print in another standard size.
Auto
Automatically adjusts zoom ratio to accommodate the paper size in the Feed Tray.
Margin+
Reducing the original slightly. This feature is useful when allowing binding margins, or when text or diagram
extends beyond the printing area.
Specify reduction rate of 90%-99% on the Admin. screen.
Free
The top/bottom and left/right of the original can be magnified or reduced and printed as desired.
Specify the zoom ratio between 50% and 200% in increments of 1%.
Zoom
Allows you to specify numerical resize ratio.
Specify the zoom ratio between 50% and 200% in increments of 1%.
Note:
• To avoid paper jam, flipping or ink smudges on the back side by design the machine does not print too close to the
edge. The top edge in particular needs 5 mm of margin space.
5 mm wide area on the top edge (marked
) of the Platen Glass (or the ADF unit) cannot be scanned, regardless
of enlargement or reduction settings.
• Do not position the original within 5 mm of the top edge, or the top edge of its printed image will be cut off.
This 5 mm margin will remain even in the “Max. Scan” setting.
• If the original document has no margin on its top edge, the top 5 mm of its print will be cut off even when “Margin+”
is selected. Move the original about 5 mm inwards from the top edge of the platen glass and reduce the size.