Riso RZ 970 Series User Manual - Replacing The Master Roll
Replacing Consumables
Replacing the Master Roll
206
Replacing the Master Roll
When the Master Roll is depleted, a message is displayed and the machine stops. Replace with a new Master Roll.
Important!:
• For the Master Roll, it is recommended to use the products specified by RISO.
• Keep the power ON while replacing the master.
1
Open the Front Cover.
2
Check the indicator of the Master
Making Unit Release Button is ON.
If the indicator is off, press the Master Making Unit
Release Button to turn it on.
Important!:
• When the Print Drum is out, Master Making Unit
cannot be pulled out. Return the Print Drum into
position and press the Master Making Unit
Release Button.
3
Pull out the Master Making Unit.
Grasp the Master Making Unit Handle and pull for-
ward.
Pull out slowly until it stops.
4
Open the Master Making Unit Cover.
Grasp the Master Making Unit Cover Lever and
open the Master Making Unit Cover.
Master Making
Unit Release Button
Master Making Unit
Master Making Unit Cover
Master Making Unit Cover Lever