Riso RZ 970 Series User Manual - page 45
Basic Operations
Printing from a Paper Document or Book
44
6
Press the
key.
Starts scanning of the original. A master is made
once the scan is completed, and a proof copy will
be printed.
Tip:
Auto Idling
When “Auto Idling” is set to ON, idling operations
may occur when master-making process is initi-
ated.
Factory default is set to idle automatically at the
beginning of the master-making when the
machine is inactive for over 12 hours.
To toggle “Auto Idling” ON/OFF, or to modify
number of hours before activating next idling, go
to the Admin. screen.
Idling can also be manually initiated when making
a master.
Note:
• When “Auto Process” is selected, the process
will be different.
7
Check the proof copy result.
When a proof copy is printed, the Print Basic
Screen will be displayed automatically.
Check the proof copy; e.g., print position and den-
sity.
If necessary, change print position and density.
• Print Density ()p.93)
• Interval ()p.98)
• Eject Wing Control ()p.102)
After adjustment, press the
key to print a
proof copy.
Important!:
• When the machine has not been used for a long
period of time, the print quality may suffer due
to dry ink on the Print Drum.
Press the
key to print proof copies sev-
eral times.
Note:
• You can also adjust the print position, the den-
sity, and the speed while print process is in
progress.
8
Enter the number of copies using the
Print Quantity Keys.
The specified number is displayed on the Print
Quantity Display.
Making Master...
Page
Contrast
Size
Feed Tray
Info
Idle
Line
Auto
Auto
A4
Black
READY
(A4)
D-Feed
Check
Multi-Up
0 . 0mm
0 . 0mm
READY
Black
Basic
Selections
Functions
Admin.
Print Position
Feed Tray
Idle
Info
Select Print Quantity
A4
Auto
D-Feed
Check
Renew Page
Slient
180ppm