Riso RZ 970 Series User Manual - page 164
Advanced Features
Registering a Custom Paper Size [Custom Paper Entry]
163
11
Touch [OK] when done.
Note:
• To change a name, repeat from step 8.
12
Confirm the name and touch
[Close].
The following screen appears.
Returns to the Admin. screen. Feed Tray (Paper)
is updated.
Tip:
Printing on Extended Paper
The machine can print on paper 433-555 mm long
(top to bottom facing the paper feeding direction)
by storing the size as a custom-size.
When entering a size longer than 433 mm (top to
bottom facing the paper feed direction) on the
Custom Paper Entry screen, the paper will be
treated as “Extended Paper”.
When “Extended Paper” is selected on the Feed
Tray (Paper) screen, the machine switches into
“Extended Paper” mode.
Important!:
• Some Extended Paper may fail to pass through
the machine due to its paper characteristics, or
may get smudged with ink due to its image posi-
tioning. Consult your dealer (or authorised serv-
ice representative) for advice.
“Extended Paper” Mode
• When the machine is on “Extended Paper”
mode, it is indicated in the message area as
either “Ready to Make Master
“Ready to Print
• On “Extended Paper” mode, the machine can
print papers measuring 433-555 mm length-
wise from top to bottom facing the paper feed
direction. However, maximum printing area and
top/bottom Print Positioning range remains as
usual.
• Print timing and speed is different on “Extended
Paper” mode in comparison to normal printing.
This is to be expected, so do not be alarmed.
• Contact your dealer (or authorised service rep-
resentative) for suggestions about placing
paper on the Paper Receiving Trays when on
“Extended Paper” mode.
Capital
Small
CardA
Rename
Cancel
OK
Custom Paper Entry
S e l e c t a B u t t o n N a m e t o b e C h a n g e d
Close
Clear
Rename
Change
Register
W200 H300 mm
C a r d A
No Entry
U - 2
No Entry
U - 3
No Entry
U - 4
No Entry
U - 6
U - 5
No Entry
OFF
Internal CI
P.1 / 5
All
Display
Default
S y s t e m
Link Mode
Editor
Custom Paper Entry
Irregular Fitter
Folder Renaming
CI Select
Base IP Address
Admin.