Riso RZ 970 Series User Manual - [Link Mode]
When using a Linked Printer (sold separately)
Printing Scanned Original from a Linked Printer [Link Mode]
187
Printing Scanned Original from a Linked Printer
[Link Mode]
The mode in which an original is scanned into the machine and printed from a Linked Printer is called “Link Mode”.
In Link Mode, the original is printed from the Linked Printer, regardless of the number of copies to print.
1
Switch to Link Mode.
Press the
key on the machine to switch to
Link Mode.
From Mode Screen, touch [Link Print] to switch
to the Link Basic Screen.
When “Mode Key Pattern” is set to “Loop”, press
the
key until the Link Basic Screen is dis-
played.
Note:
• While the message “Starting Up RISORINC-
NET / Acquiring Linked Printer Configuration
Data Please Wait a Moment” is displayed on
the machine, the Linked Printer information is
being retrieved via the network. Wait until the
message disappears.
2
Place the original.
Place the original on Platen Glass or in the ADF
unit (option).
For information about placing the original, see
step 4 in “Printing from a Paper Document or
Note:
• To scan both sides of the original and print on
one side, touch [Duplex] on the Functions
screen and then touch [Duplex -> Simplex].
• When using the Auto Document Feeder DX-1,
place the original face up.
3
Select printing paper.
If the Linked Printer has multiple feed trays, touch
[Paper] to specify the tray (paper size).
1)
Touch [Paper] in the Link Basic Screen.
2)
Select the desired paper size.
---
(---)
Ready for Link Print
Page
Contrast
Size
Feed Tray
Selections
Basic
Functions
Admin.
LBP1
MP
Idle
Auto
Auto
1
2
A4
A3
B4
Line
Book
Shadow
A4
(A4)
Ready for Link Print
Page
Contrast
Size
Feed Tray
Selections
Basic
Functions
Admin.
LBP1
MP
Idle
Auto
Auto
1
2
A4
A3
B4
Line
Book
Shadow
A4
1
Ready for Link Print
Page
Feed Tray
Basic
Admin.
LBP1
MP
Idle
1
2
A4
A3
B4
Line
Book
Shadow
MP
1 A4
A3
B4
Auto
2
Feed Tray
Cancel
OK