Riso RZ 970 Series User Manual - Changing Default Settings
Advanced Features
Changing Default Settings [Admin.]
148
Changing Default Settings
[Admin.]
The default settings can be modified to best suit your needs.
They may be edited as needed.
Important!:
• Depending upon the usage environment, the “Admin.” features may not be available (the “Admin.” tab may not be
displayed).
Consult your dealer (or authorised service representative) for details.
Note:
• The default settings are the values restored when the machine is turned ON or when the
key is pressed.
Configurable Functions
:Initial setting (factory default)
Display Access
Button
Functions
Description
[Display]
DirectAccess Entry
Store frequently-used functions on the Basic Screen
for each mode.
Selections Entry
Store frequently-used functions on the Selections
screen for each mode.
Display Priority
Select first screen to display following the Startup.
Note:
• The Mode Screen is available only when “Mode Key
Pattern” is set to “Mode Selection”.
Mode Screen/RISO Print/Link
Mode
Mode Key Pattern
Select screens to display when the
key is
pressed.
[Mode Selection]
Pressing the
key will open the Mode Screen no
matter which screen you are currently on.
[Loop]
The screen changes as shown below when the
key is pressed.
• Normally: “Master Making Basic Screen”
Basic Screen”
• When a Linked Printer is connected: “Link Basic
Screen”
←→“Master Making/Print Basic Screen”
• When the optional Document Storage Card is
installed: “Scan Basic Screen”
←→“Master Making/
Print Basic Screen”
Mode Selection/Loop