Riso RZ 970 Series User Manual - page 46
Basic Operations
Printing from a Paper Document or Book
45
Note:
• To change the number, press the
key,
then re-enter the correct number.
9
Press the
key.
The specified number of copies will be printed.
Note:
• Press the
key to interrupt printing operation
currently underway.
• If the machine is equipped with the Auto-control
Stacking Tray, you can adjust the Receiving
Tray Paper Guides even during the printing
process, which is particularly useful when paper
is not fully discharged onto the receiving tray.
Press the Receiving Tray Paper Guides’ Open-
ing Button to move the Receiving Tray Paper
Guides outward in 1 mm increments.
• When printing from a computer, if the machine
is inactive for a certain period of time, it deter-
mines that the current job is completed, even if
the actual printing is still under way. If another
person accidentally initiates another job from
the computer, this will cause a new master to be
made, discarding the current one. To prevent
this from occurring, you may set a “Reserve
Period”. We recommend that you activate the
“Reservation” setting when printing leaflets etc.
to prevent interruption.
10
Press the
key when print job is
complete.
The setting returns to its default value.
Note:
• After printing is completed, the master remains
on the Print Drum. To protect confidential docu-
ments from unauthorised duplication, use the
“Confidential” feature to discard the master
after printing.
11
Remove the printed paper.
Machine equipped with the Auto-
control Stacking Tray
Press the Receiving Tray Paper Guides’ Open-
ing Button and remove the paper.
Machine equipped with the
Receiving Paper Tray
Open the Receiving Tray Paper Guides and
remove the paper.
Note:
• Easily restore current settings by saving them into memory. Saved settings can be retrieved even when the
key is pressed, or after turning the power off.
P r i n t i n g
...
Feed Tray
Print Position
Idle
Info
Auto
A4
Black
READY
D-Feed
Check
Renew Page
0 . 0mm
0 . 0mm
S i l e n t
1 8 0 ppm
Job Ends in 5 min.