Riso RZ 970 Series User Manual - Auto Document Feeder Dx-1

Advanced Features

Selecting Scanning Sides When Using the Auto Document Feeder DX-1 [Scanning Side -ADF]

142

Selecting Scanning Sides When Using the 

Auto Document Feeder DX-1 

[Scanning Side -ADF]

When scanning originals using the optional Auto Document Feeder DX-1, there are three scanning side options: 

“Front Side”, “Back Side”, or “Duplex”.

Important!:

• If the original is set on Auto Document Feeder DX-1, “Book Shadow” function cannot be used. 

Note:

• Go to “Admin.” and select “Scanning Side -ADF” to save a frequently used setting as the default.

)

p.149

Front Side -> Simplex

Scans the front side of the original, and prints on one side.

Important!:

• If the “Auto-Link” function is ON or the “Top Margin” function is used, 

the setting, “Front Side -> Simplex” must be used. 

Back Side -> Simplex

Scans the back side of the original, and prints on one side.

Duplex -> Simplex

Scans both sides of the original and prints on one side. The front side is scanned first and then the back side. “Set-

ting Direction” and “Paging Direction” of the original must be specified.

Important!:

• The “Duplex -> Simplex” option is not available in “Programme; 

Multi-Page Mode” and “Multi-Up Print”. Likewise, if “Duplex -> Sim-

plex” is selected, “Multi-Page Mode” and “Multi-Up Print” are not 

available.

Note:

• If the original includes blank pages, these will also be scanned and included in copies.

Original

Printed Copies

Original

Printed Copies

Original

Printed Copies