Riso RZ 970 Series User Manual - page 48
Basic Operations
Printing from a Computer Data [Direct Print]
47
Printing Computer Data
1
Confirm the machine status.
Make sure that the power to the machine is turned
ON and that the paper is set properly (especially
when using the Standard Feed Tray).
Note:
• When the power is OFF, both the Display and
the
key are off. Turn the power ON.
• If the
key is lit, the machine is in Energy
Saving mode. Press the
key to cancel
Energy Saving mode.
• The machine automatically wakes up from
Energy Saving mode when data is sent from a
computer, and it starts processing the data.
• If you are using RISORINC-NET, you can
check the machine status (power ON/OFF,
paper settings, etc.) remotely from your compu-
ter monitor.
2
Set printing options from your com-
puter screen.
Important!:
• Make sure to uncheck the “Collate” option in the
Print dialog box.
• When the machine has not been used for a long
period of time, the print quality may suffer due
to dry ink.
Before printing, either perform an Idling Action
()p.135) (especially when using Full Auto
mode) or press the
key to print proof
copies several times.
3
Click [OK] on the print dialog box.
Data is sent from the computer.
When the machine receives data, a print job auto-
matically starts in accordance with the printer
driver settings.
Skip to step 5 if you are printing in Full Auto.
Note:
• If the data contains multiple pages, all pages
are printed at once.
• To manually stop a job during master-making or
printing operation, press the
key. In mas-
ter-making process, the machine will stop after
the master is made. In the printing process, the
machine will stop printing.
Press the
key to resume the job.
• You can also adjust Print Position, the density,
and the speed while Print process is in
progress.
• Entering the number of copies from the Print
Quantity Keys will override the number speci-
fied in the print driver dialog.