Riso RZ 970 Series User Manual - page 43
Basic Operations
Printing from a Paper Document or Book
42
Tip:
Using the Gauge Cover
The Gauge Cover allows you to align original
images precisely on the Platen Glass even if
they are not squared on the sheet. Shift the
original sheet along the grid lines printed on the
cover, touching it through the openings on the
cover.
When placing in the ADF unit
(Option)
Use the ADF unit if you are printing multiple
originals in succession. Place originals face-
down and then adjust the ADF Original Guides
to the width of the originals. Insert the originals
as far into the ADF unit as possible.
When using the Auto Document Feeder AF-
VI:II, place the original face down.
When using the optional Auto Document
Feeder DX-1, you can specify which side to
scan. For detailed settings, see “Selecting
Scanning Sides When Using the Auto Docu-
ment Feeder DX-1” ()p.142).
Important!:
• The ADF unit can accommodate originals as
shown below. Smaller originals should be
placed on the Platen Glass.
Auto Document Feeder AF-VI:II:
100 mm
× 148 mm and above
Auto Document Feeder DX-1:
105 mm
× 128 mm and above
• Do not place multiple originals of differing sizes
or otherwise unsuitable originals into the ADF
unit.
Doing so can cause paper jams and damage
the machine.
• Once the original is placed into the ADF unit,
“OP Auto Process” setting is turned ON. Press
the
key to turn it OFF.
Default “Auto Process” setting for the ADF unit
can be changed on the Admin. screen.
Note:
• Up to 50 sheets of 64g/m
2
paper can be placed
in the ADF unit.
• To print a proof copy after each master-making
process, select [ADF Semi-Auto].
4
Configure print functions.
In the Master Making Basic Screen, select func-
tions as needed.
Gauge Cover
Grasp here
and lift up the
gauge cover
Place the original
face-down
READY
A4
Line
Black
Page (A4)
Basic
Selections
Functions
Admin.
Contrast
Auto
Auto
Size
Feed Tray
Idle
Multi-Up
D-Feed
Check
Info
Ready to Make Master