Riso RZ 970 Series User Manual - page 214
Replacing Consumables
Replacing the Print Drum (Colour Change)
213
Replacing the Print Drum (Colour Change)
When replacing with a Colour Drum to change colours, or when removing jammed paper, follow the steps to remove
Print Drum. Be sure to use a Colour Drum specifically designed and approved for use with this machine.
B
Caution:
• Do not stand the Print Drum upright. Doing so may stain the floor, etc.
Important!:
• Use only Print Drums specifically designed and approved for use with this machine.
• Keep the power ON while removing or replacing the Print Drum.
• Make sure to place the changed Print Drum into the drum case and store horizontally.
Removing the Print Drum
1
Open the Front Cover.
2
Check that the indicator of the Print
Drum Release Button is ON.
If the indicator is off, press the Print Drum Release
Button to turn it on.
Important!:
• When the Master Making Unit is out, the Print
Drum cannot be pulled out. Return the Master
Making Unit into position and press the Print
Drum Release button.
3
Pull out the Print Drum.
Grasp the Print Drum Handle and slowly pull until
the Print Drum is completely extended.
4
Remove the Print Drum.
Use both hands to lift the Print Drum straight up to
remove from the rail.
Proceed with replacing the drum, removing the
paper jam, etc..
Print Drum
Release Button
Drum Handle
Firmly grasp
the Green Handle