Riso RZ 970 Series User Manual - page 139
Advanced Features
Reproducing the Master [Renew Page][Auto Page Renewal]
138
Using Auto Page Renewal
In order to use “Auto Page Renewal”, you must enable it in “Admin.” prior to use.
If “Auto Page Renewal” is activated and “Auto Page Renewal” is set to “ON”, “Auto Page Renewal” can be executed
during a print job.
Important!:
• If “Auto Page Renewal” is not activated in “Admin.”, “Auto Page Renewal” cannot be set to “ON”.
• The “Auto Page Renewal” is set to “OFF” in the following instances.
– When printing with “Programme”
– When the
is pressed
– When attempting to process the next job with direct print
Turning ON “Auto Page Renewal”
1
Touch [Functions] on the Print Basic
Screen.
2
Touch [Auto Page Renewal].
“Auto Page Renewal” is activated.
When you print with these settings, “Auto Page
Renewal” will be executed after the specified
number of copies are printed.
Note:
• If [Auto Page Renewal] is greyed-out, go to
“Admin.” and turn “Auto Page Renewal” ON.
0 . 0mm
0 . 0mm
READY
Black
Basic
Selections
Functions
Admin.
Print Position
Feed Tray
Idle
Info
Select Print Quantity
A4
Auto
D-Feed
Check
Renew Page
Silent
180ppm
P. 4/4
Basic
Selections
Functions
Admin.
Select Print Quantity
Renew Page
Special Paper Ctrl
Auto Page Renewal
Scanning Side -ADF
Duplex(Link)
Job Separation