D-Link xStack DGS-3600 Series User Manual - Static Vlan Entries
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Static VLAN Entries
In the
L2 Features
folder, click
VLAN > Static VLAN Entries
to open the following window:
Figure 7- 5. Current Static VLAN Entries window
The
Current
Static VLAN Entries
window lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an
existing 802.1Q VLAN, click the corresponding button under the Delete heading.
To create a new 802.1Q VLAN, click the
Add
button. A new window will appear, as shown below, to configure the port settings
and to assign a unique name and number to the new VLAN. See the table below for a description of the parameters in the new
window.
Figure 7- 6. Static VLAN window - Add
To return to the
Current
Static VLAN Entries
window, click the
Show All Static VLAN Entries
link. To change an existing
802.1Q VLAN entry, click the
Modify
button of the corresponding entry to modify. A new window will appear to configure the
port settings and to assign a unique name and number to the new VLAN. See the table below for a description of the parameters in
the new window.
NOTE:
The Switch supports up to 4k static VLAN entries.
94