D-Link xStack DGS-3600 Series User Manual - page 238
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Group Address
Enter the multicast group address for this Static RP. This address must be a class D address.
Group Mask
Enter the mask for the multicast group address stated above.
RP Address
Enter the IP address of the rendezvous Point.
Click
Apply
to implement changes made.
PIM Register Checksum Settings
This window is used to configure RP addresses. The data part is included when calculating the checksum for a PIM register
message to the RP on the first hop router. To view this window, click
L3 Features > IP Multicast Routing Protocol > PIM >
PIM Register Checksum Settings
.
Figure 8- 8 . PIM Register Checksum Settings window
9
The following fields can be set:
Parameter
Description
RP Address
Enter the IP address of the RP for which the data part will be included when calculating
checksum for registering packets to the RP.
Click
Apply
to add the RP into the checksum including the data list.
222