D-Link xStack DGS-3600 Series User Manual - Cpu Utilization
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
CPU Utilization
This window displays the percentage of the CPU being used, expressed as an integer percentage and calculated as a simple
average by time interval. To view this window, open the
Monitoring
folder and click the
CPU Utilization
link.
Figure 12- 2. CPU Utilization window
Click
Apply
to implement the configured settings. The window will automatically refresh with new updated statistics
The information is described as follows:
Parameter
Description
Time Interval
Select the desired setting between
1s
and
60s
, where "s" stands for seconds. The default
value is one second.
Record Number
Select number of times the Switch will be polled between
20
and
200
. The default value is
200
.
Show/Hide
These check boxes allow the user to choose the CPU utilization over increments of
Five
Secs
,
One Min
and
Five Mins
. Each time increment will be displayed in the window as a
specifically colored line. Five seconds will be displayed as yellow, one minute as blue and
five minutes as pink.
310