D-Link xStack DGS-3600 Series User Manual - page 90
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 6- 56. sFlow Counter Analyzer – Add window
The following fields can be set or modified:
Parameter Description
Analyzer Server (1-
4)
Enter an integer from
1
to
4
to denote the sFlow Analyzer to be added. Up to four entries can
be added, but each entry must have its own unique Collector Port.
Owner
Users may enter an alphanumeric string of up to 16 characters to define the owner of this
entry. Users are encouraged to give this field a name that will help them identify this entry.
When an entry is made in this field, the following Timeout field is automatically set to
400
seconds, unless the user alters the Timeout field.
Timeout (1-2000000
sec)
This field is used to specify the timeout for the Analyzer server. When the server times out, all
sFlow samples and counter polls associated with this server will be deleted. The user may set
a time between
1
and
2000000
seconds with a default setting of
400
seconds.
Collector Address
The IP address of the sFlow Analyzer Server. If this field is not specified, the entry will become
0.0.0.0 and therefore the entry will be inactive. Users must set this field.
Collector Port (1-
65535)
The destination UDP port where sFlow datagrams will be sent. The default setting for this field
is
6343
. Only one Analyzer Server address can be set for one UDP Collector Port.
Max Datagram Size
(300-1400)
This field will specify the maximum number of data bytes that can be packaged into a single
sFlow datagram. Users may select a value between
300
and
1400
bytes with a default setting
of
1400
bytes.
Click
Apply
to save changes made.
74