D-Link xStack DGS-3600 Series User Manual - Igmp Snooping Group
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
VLAN, or MAC address.
VID
The VLAN ID of the VLAN the port is a member of.
MAC Address
The MAC address entered into the address table.
Port
The port that the MAC address above corresponds to.
Type
How the Switch discovered the MAC address. The possible entries are Dynamic, Self, and
Static.
Next
Click this button to view the next page of the address table.
Clear Dynamic Entry
Clicking this button will clear Dynamic entries learned by the Switch. This may be
accomplished by VLAN Name or by Port.
View All Entry
Clicking this button will allow the user to view all entries of the address table.
Clear All Entry
Clicking this button will allow the user to delete all entries of the address table.
IGMP Snooping Group
IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP
packets that pass through the Switch. The number of IGMP reports that were snooped is displayed in the Reports field. To view
the
IGMP Snooping Group Table
window, click
IGMP Snooping Group
in the
Monitoring
folder:
Figure 12- 2 . IGMP Snooping Group Table window
8
The user may search the
IGMP Snooping Table
by entering the VLAN Name in the top left hand corner and clicking
Search
.
NOTE:
The Switch supports up to 2048 IGMP Snooping
groups.
The following field can be viewed:
Parameter Description
VLAN Name
The VLAN Name of the multicast group.
337