D-Link xStack DGS-3600 Series User Manual - page 93
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Clear All
Click this button to reset the information in this window.
To add a new sFlow Counter Poller setting, click the
Add
button in the previous window which will display the following window
to be configured:
Figure 6- 60. sFlow Counter Poller Add window
The following fields may be set:
Parameter Description
From
Choose the beginning port of the range of ports to be configured for counter polling.
To
Choose the ending port of the range of ports to be configured for counter polling.
Analyzer Server ID
(1-4)
Enter the previously configured Analyzer Server ID to state the device that will be receiving
datagrams from the Switch. These datagrams will include the counter poller information taken
using the polling mechanism configured here.
Polling Interval (20-
120 sec)
Users may configure the Polling Interval here. The switch will take a poll of the IF counters
every time this interval reaches 0, and this information will be included in the sFlow datagrams
that will be sent to the sFlow Analyzer for examination. Ticking the Disabled check box will
disable the counter polling for this entry.
Click
Apply
to save changes made.
77