D-Link xStack DGS-3600 Series User Manual - page 141
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
open a new window for configuring parameters associated with that particular MSTI.
VID List
This field displays the VLAN IDs associated with the specific MSTI.
Clicking the
Add
button will reveal the following window to configure:
Figure 7- 40. Instance ID Settings window – Add
The user may configure the following parameters to create a MSTI in the Switch.
Parameter
Description
MSTI ID
Enter a number between
1
and
15
to set a new MSTI on the Switch.
Type
Create
is selected to create a new MSTI. No other choices are available for this field when
creating a new MSTI.
VID List (1-4094)
This field is used to specify the VID range from configured VLANs set on the Switch.
Supported VIDs on the Switch range from ID number
1
to
4094
.
Click
Apply
to implement changes made.
To configure the settings for the CIST, click on its hyperlinked name in the
MST Configuration Identification
window, which
will reveal the following window to configure:
Figure 7- 41. Instance ID Settings window - CIST modify
The user may configure the following parameters to configure the CIST on the Switch.
Parameter Description
MSTI ID
The MSTI ID of the CIST is
0
and cannot be altered.
Type
This field allows the user to choose a desired method for altering the MSTI settings. The user
has 2 choices.
•
•
Add VID
- Select this parameter to add VIDs to the MSTI ID, in conjunction with the
VID List parameter.
Remove VID
- Select this parameter to remove VIDs from the MSTI ID, in con-
junction with the VID List parameter.
125