D-Link xStack DGS-3600 Series User Manual - page 296
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
QuietPeriod
This allows you to set the number of seconds that the Switch remains in the quiet state
following a failed authentication exchange with the client. The default setting is
60
seconds.
SuppTimeout
This value determines timeout conditions in the exchanges between the Authenticator and
the client. The default setting is
30
seconds.
ServerTimeout
This value determines timeout conditions in the exchanges between the Authenticator and
the authentication server. The default setting is
30
seconds.
MaxReq
The maximum number of times that the Switch will retransmit an EAP Request to the client
before it times out of the authentication sessions. The default setting is 2.
ReAuthPeriod
A constant that defines a nonzero number of seconds between periodic reauthentication of
the client. The default setting is
3600
seconds.
ReAuth
Determines whether regular reauthentication will take place on this port. The default setting
is
Disabled
.
Capability
This allows the 802.1x Authenticator settings to be applied on a per-port basis. Select
Authenticator
to apply the settings to the port. When the setting is activated A user must
pass the authentication process to gain access to the network. Select
None
disable 802.1x
functions on the port.
Click
Apply
to implement configuration changes.
280