D-Link xStack DGS-3600 Series User Manual - Leds
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 1- 4. Front Panel of the DGS-3627G
DGS-3650
•
Forty-eight 10/100/1000BASE-T ports
•
Four Combo SFP ports located to the right
•
One female DCE RS -232 DB-9 console port
•
LEDs for Power, Console, RPS, Link/Act/Speed and 10GE for each port
•
Stacking Module Numbered LED
Figure 1- 5. Front Panel of the DGS-3650
LEDs
The following table lists the LEDs located on models of the xStack DGS-3600 Series switches along with their corresponding
description:
LED Indicator
Color
Status
Description
Solid Power
On
Power
Green
Dark Power
Off
Solid Console
On
Console
Green
Dark Console
Off
Solid
RPS in use
RPS
Green
Dark
RPS not in use or not present
Stacking LED
Green Numbered
1-12
Box ID of the Switch in the switch stack. This field will
read 1 for a switch in standalone mode. When the switch
in question is a master of a switch stack, the number of
the switch in the stack will be displayed, and the letter H
will flash alternatively with this number.
Solid
Denotes an active connection at 1000Mbps.
Green
Blinking
Denotes data transfer at 1000Mbps.
Solid
Denotes an active connection at 10/100Mbps.
Orange
Blinking
Denotes data transfer at 10/100Mbps.
Port LEDs
(10/100/1000Mbps
ports)
Dark No
Light
Link
Down
Solid
Denotes an active connection at 1000Mbps.
Green
Blinking
Denotes data transfer at 1000Mbps.
SFP Port LED
Dark No
Light
Link
Down
Solid
Denotes an active connection.
Green
Blinking
Denotes data transfer.
10GE Module
LEDs (Located on
the front panel)
Dark No
Light
Link
Down
3