D-Link xStack DGS-3600 Series User Manual - Browse Pim Rp-Set Table
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Browse PIM IP Multicast Route Table
The PIM IP Multicast Route Table is used to view information regarding the multicast data route entries in the Switch. This
window may be found by clicking
Monitoring > PIM Monitor > Browse PIM IP Mutlicast Route Table
.
Figure 12- 4 . PIM IP Multicast Route Table window
2
Browse PIM RP-Set Table
The following window is used to assess information regarding the Rendezvous Point (RP) Set on the Switch. This window may be
found by clicking
Monitoring > PIM Monitor > Browse PIM RP-Set Table
.
Figure 12- 4 . PIM RP Set Table window
3
OSPF Monitor
This section offers windows regarding OSPF (Open Shortest Path First) information on the Switch, including the
OSPF LSDB
Table
,
OSPF Neighbor Table
and the
OSPF Virtual Neighbor Table
. To view these tables, open the
Monitoring
folder and
click
OSPF Monitoring
.
Browse OSPF LSDB Table
This table, located in the
Monitoring
folder, can be found in the
OSPF Monitor
folder, by clicking on the
Browse
OSPF LSDB
Table
link. The OSPF LSDB Ta
ble
displays the current link-state database in use by the OSPF routing protocol on a per-OSPF
area basis.
Figure 12- 4 . OSPF LSDB Table window
4
The user may search for a specific entry by entering the following information into the fields at the top of the screen:
To browse the
OSPF LSDB Table
window, you first must select which browse method you want to use in the Search Type field.
The choices are
All
,
Area ID
,
Advertise Router ID
,
LSDB
,
Area ID & Advertise Router ID
,
Area ID & LSDB
, and
Advertise Router
ID & LSDB
.
346