D-Link xStack DGS-3600 Series User Manual - Port Description
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Port Description
The Switch supports a port description feature where
the user may name various ports on the Switch. To
assign names to various ports, click
Administration
>
Port Configuration
>
Port Description
to view the
following window:
Use the
From and To
pull-down menu to choose a port
or range of ports to describe, and then enter a
description of the port(s). Click
Apply
to set the
descriptions in the Port Description Table.
The Medium Type applies only to the Combo ports. If
configuring the Combo ports this defines the type of
transport medium used. SFP ports should be nominated
Fiber
and the Combo 1000BASE-T ports should be
nominated
Copper
. The result will be displayed in the
appropriate switch port number slot (C for copper ports
and F for fiber ports).
Figure 6- 9. Port Description window
User Accounts
Use the
User Account Management
window to control user privileges. To view existing User Accounts, open the
Administration
folder and click on the
User Accounts
link. This will open the
User Account Management
window, as shown
below.
Figure 6- 10. User Accounts window
To add a new user, click on the
Add
button. To modify or delete an existing user, click on the
Modify
button for that user.
39