D-Link xStack DGS-3600 Series User Manual - Configure 802.1X Guest Vlan
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Configure 802.1x Guest VLAN
In the
Security
folder, open
802.1x
and click
Configure 802.1x
Guest VLAN
, which will display the following window for the
user to configure. Remember, to set a Guest 802.1x VLAN, the user must first configure a normal VLAN which can be enabled
here for Guest VLAN status.
Figure 11- 1 . Guest VLAN Settings window
3
The following fields may be modified to enable the guest 802.1x VLAN:
Parameter Description
VLAN Name
Enter the pre-configured VLAN name to create as a Guest 802.1x VLAN.
Operation
The user has three choices in configuring the Guest 802.1x VLAN, which are:
Enable Ports
– Selecting this option will enable ports listed in the Port List below, as part of the
Guest VLAN. Be sure that these ports are configured for this VLAN or users will be prompted
with an error message.
Disable Ports
- Selecting this option will disable ports listed in the Port List below, as part of the
Guest VLAN. Be sure that these ports are configured for this VLAN or users will be prompted
with an error message.
Delete
– Selecting this option will delete the VLAN entered in the VLAN Name window above.
Port List
Enter the ports to be operational for the Gust VLAN. Checking the All box will select all ports to
be enabled.
Click
Apply
to implement the guest 802.1x VLAN settings entered. Only one VLAN may be assigned as the 802.1x Guest
VLAN.
277