D-Link xStack DGS-3600 Series User Manual - Browse Igmp Group Table
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Browse IGMP Group Table
The
Browse IGMP Group Table
window may be found in the
Monitoring
folder. This window will show current IGMP group
entries on the Switch. To search a specific IGMP group entry, enter an interface name into the Interface Name field or a Multicast
Group IP address and click
Find
.
Figure 12- 3 . IGMP Group Table window
7
Browse DVMRP Routing Table
DVMRP Monitor
This folder allows the DVMRP (Distance-Vector Multicast Routing Protocol) to be monitored for each IP interface defined on the
Switch. This folder, found in the
Monitoring
folder, offers three windows for monitoring:
Browse DVMRP Routing Table
,
Browse DVMRP Neighbor Address Table
, and
Browse DVMRP Routing Next Hop Table
.
Multicast routing information is gathered and stored by DVMRP in the DVMRP Routing Table, which may be found in the
Monitoring
folder under
DVMRP Monitor
> Browse
DVMRP Monitoring
, contains one row for each port in a DVMRP mode.
Each routing entry contains information about the source and multicast group, and incoming and outgoing interfaces. You may
define your search by entering a Source IP Address and its subnet mask into the fields at the top of the window, and click
Find
.
Figure 12- 3 . DVMRP Routing Table window
8
Browse DVMRP Neighbor Table
This table, found in the
Monitoring
menu under
DVMRP Monitor > Browse DVMRP Neighbor Table
contains information
about DVMRP neighbors of the Switch. To search this table, enter either an Interface Name or Neighbor Address into the
respective field
and click the
Find
button. DVMRP neighbors of that entry will appear in the
DVMRP Neighbor Table
below.
344