D-Link xStack DGS-3600 Series User Manual - Dns Relay Static Settings
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Secondary Name
Server
Allows the entry of the IP address of a secondary domain name server (DNS).
DNSR Cache Status
This can be toggled between
Disabled
and
Enabled.
This determines if a DNS cache will be
enabled on the Switch.
DNSR Static Table
State
This field can be toggled using the pull-down menu between
Disabled
and
Enabled.
This
determines if the static DNS table will be used or not.
Click
Apply
to implement changes made.
DNS Relay Static Settings
To view this window, click
L3 Features > DNS Relay > DNS Relay Static Settings
, which will open the
DNS Relay Static
Settings
window, as seen below:
Figure 8- 64. DNS Relay Static Settings window
To add an entry into the DNS Relay Static Table, simply enter a Domain Name with its corresponding IP address and click
Add
under the Apply heading. A successful entry will be presented in the table below, as shown in the example above. To erase an
entry from the table, click its corresponding
under the Delete heading.
201