D-Link xStack DGS-3600 Series User Manual - page 154
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
LLDP Management Address Settings
The following window is used to set up LLDP management address settings on the Switch. Open
LLDP
in the
L2 Features
folder
and click the
LLDP Management Address Settings
link.
Figure 7- 56. LLDP Management Address Settings window
The following parameters can be set or displayed:
Parameter Description
Unit
Select the desired stacking unit, if applicable.
From/To
Select a port or group of ports using the pull-down menus.
Address Type
Use the drop-down menu to toggle between
IPV4 Address
and
IPV6 Address
.
Address
Enter the LLDP management address in this field.
Port State
Use the drop-down menu to toggle the Port State between
Enabled
and
Disabled
.
Click
Apply
to implement changes made.
138