D-Link xStack DGS-3600 Series User Manual - Port Utilization
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Port Utilization
This window displays the percentage of the total available bandwidth being used on the port. To view the port utilization, open the
Monitoring
folder and then the
Port Utilization
link:
Figure 12- 3. Port Utilization window
Select a Port number from its drop-down menu and click
Apply
to display the Port Utilization for a particular port. The following
fields can be set:
Parameter Description
Time Interval
Select the desired setting between
1s
and
60s
, where "s" stands for seconds. The default
value is one second.
Record Number
Select number of times the Switch will be polled between
20
and
200
. The default value is
200
.
Show/Hide
Check whether to display Port Utilization.
Click
Clear
to refresh the graph. Click
Apply
to set changes implemented.
311