D-Link xStack DGS-3600 Series User Manual - Pim Monitor
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 12- 39. DVMRP Neighbor Table window
Browse DVMRP Routing Next Hop Table
The DVMRP Routing Next Hop Table contains information regarding the next-hop for forwarding multicast packets on outgoing
interfaces. Each entry in the
DVMRP Routing Next Hop Table
window refers to the next-hop of a specific source to a specific
multicast group address. This table is found in the
Monitoring
folder under
DVMRP Monitoring,
with the heading
Browse
DVMRP Routing Next Hop Table
.
To search this table, enter either an Interface Name or Source IP Address into the respective
field
and click the
Find
button. The next hop of that DVMRP Routing entry will appear in the DVMRP Routing Next Hop Table
below.
Figure 12- 4 . DVMRP Routing Next Hop Table window
0
PIM Monitor
Multicast routers use Protocol Independent Multicast (PIM) to determine which other multicast routers should receive multicast
packets. To find out more information concerning PIM and its configuration on the Switch, see the IP Multicast Routing Protocol
chapter of Section 6, Configuration.
Browse PIM Neighbor Table
The PIM Neighbor Address Table contains information regarding each of a router’s PIM neighbors. This window may be found
by clicking
Monitoring
>
PIM Monitor > Browse PIM Neighbor Table
. To search this table, enter either an Interface Name or
Neighbor Address into the respective field
and click the
Find
button. PIM neighbors of that entry will appear in the
PIM Neighbor
Address Table below.
Figure 12- 4 . PIM Neighbor Address Table window
1
345