D-Link xStack DGS-3600 Series User Manual - page 152
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
The following parameters can be set or displayed:
Parameter Description
Unit
Select the desired stacking unit, if applicable.
From/To
Select a port or group of ports using the pull-down menus.
Port VLAN ID
Use the drop-down menu to toggle Port VLAN ID between
Enabled
and
Disabled
.
Protocol VLAN ID
Use the drop-down menu to toggle among
VLAN ID
,
VLAN Name
, and
All
. Use the drop-
down menu to toggle between
Enabled
and
Disabled.
VLAN Name
Use the drop-down menu to toggle among
VLAN ID
,
VLAN Name
, and
All
. Use the drop-
down menu to toggle between
Enabled
and
Disabled.
Protocol Identity
Use the drop-down menu to toggle among
EAPOL
,
LACP
,
GVRP
,
STP
, and
All
. Use the
drop-down menu to toggle between
Enabled
and
Disabled.
Click
Apply
to implement changes made.
802.3 Extension LLDP Port Settings
The following window is used to set up 802.3 extension LLDP on individual port(s) on the Switch. Open
LLDP
in the
L2
Features
folder and click the
802.3 Extension
LLDP Port Settings
link.
136