D-Link xStack DGS-3600 Series User Manual - Snmp Group Table
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
SNMP Group Table
An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the
previous menu. To view the
SNMP Group Table
window, open the
SNMP Manager
folder in the
Administration
folder and
click the
SNMP Group Table
entry. The following window should appear:
Figure 6- 38. SNMP Group Table window
To delete an existing SNMP Group Table entry, click the corresponding under the Delete heading.
To display the current settings for an existing
SNMP Group Table
entry, click the
View
button located under the Display
heading, which will show the following window.
Figure 6- 39. SNMP Group Table Display window
To add a new entry to the Switch's SNMP Group Table, click the
Add
button in the upper left-hand corner of the
SNMP Group
Table
window. This will open the
SNMP Group Table Configuration
window, as shown below.
62