D-Link xStack DGS-3600 Series User Manual - Mac Notification Settings
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
MAC Notification Settings
Figure 6- 20. MAC Notification Global Settings window
TFTP Services
MAC Notification is used to monitor MAC addresses learned and
entered into the forwarding database. To globally set MAC notification
on the Switch, open the following window by clicking
MAC
Notification Settings
in the
Administration
folder.
Global Settings
The following parameters may be viewed and modified:
Parameter Description
State
Enable or disable MAC notification globally
on the Switch
Interval (1-
2147483647
sec)
The time in seconds between notifications.
History
Size (1-500)
The maximum number of entries listed in the
history log used for notification. Up to 500
entries can be specified.
Port Settings
To change MAC notification settings for a port or group of ports on the
Switch, configure the following parameters.
Parameter Description
From/To
Select a port or group of ports to enable for
MAC notification using the pull-down menus.
State
Enable or disable MAC Notification.
Click
Apply
to implement changes made.
Trivial File Transfer Protocol (TFTP) services allow
the Switch's firmware to be upgraded by transferring
a new firmware file from a TFTP server to the
Switch. A configuration file can also be loaded into
the Switch from a TFTP server. Switch settings can
be saved to the TFTP server, and a history log can be
uploaded from the Switch to the TFTP server. The
TFTP server must be running TFTP server software
to perform the file transfer.
Figure 6- 21. TFTP Services window
48