D-Link xStack DGS-3600 Series User Manual - page 255
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 10- 11. Access Rule Display window (Ethernet)
Figure 10- 1 . Access Rule Configuration window (IP)
2
Configure the following
Access Rule Configuration
settings for IP:
Parameter Description
Profile ID
This is the identifier number for this profile set.
Mode
Select Permit to specify that the packets that match the access profile are forwarded by the Switch,
according to any additional rule added (see below).
Select Deny to specify that packets that do not match the access profile are not forwarded by the
Switch and will be filtered.
Select Mirror to specify that packets that match the access profile are mirrored to a port defined in
the Port Mirroring window. Port Mirroring must be enabled and a target port must be set.
239