D-Link xStack DGS-3600 Series User Manual - Ospf Interface Settings
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
OSPF Interface Settings
To set up OSPF interfaces, click
L3 Features > OSPF > OSPF Interface Settings
to view OSPF settings for existing IP
interfaces. If there are no IP interfaces configured (besides the default System interface), only the System interface settings will
appear listed. To change settings for in IP interface, click on the hyperlinked name of the interface to see the configuration
window for that interface.
Figure 8- 4 . OSPF Interface Settings window
4
Figure 8- 45. OSPF Interface Settings - Edit window
Configure each IP interface individually using the
OSPF Interface Settings - Edit
window. Click the
Apply
button when you
have entered the settings. The new configuration appears listed in the
OSPF Interface Settings
window. To return to the
OSPF
Interface Settings
window, click the
Show All OSPF Interface Entries
link.
OSPF interface settings are described below. Some OSPF interface settings require previously configured OSPF settings. Read the
descriptions below for details.
Parameter
Description
Interface Name
Displays the of an IP interface previously configured on the Switch.
Area ID
Allows the entry of an OSPF Area ID configured above.
186